na3D
507 produktů
-
Přidat k OblíbenýmMotor connector - dual z
Motor connector - suitable for dual Z. Parallel connection of 2 engines to one output of the control board.
Dočasně vyprodáno
zł8,33
-
Přidat k OblíbenýmFilament welding
Filament welding product available in two dimensions. Dimensions 1.75 mm and 3.0 mm. The welding product is used to connect the ends of the strings to make the most of the coil content.
Dočasně vyprodáno
od zł50,83
-
Přidat k OblíbenýmEnd sensor on PCB - endstop
Endstop end sensor in variant with or without pulley. Easy to use, with an integrated connector on one side.
Dočasně vyprodáno
zł6,63
-
Přidat k OblíbenýmSpare motor for 3D pen
Spare engine for 3D pens.
Dočasně vyprodáno
zł25,33
-
Přidat k OblíbenýmBall bearing F623ZZ
Bearing F 623 ZZ with one row of balls in deep orbits. It transmits radial and axial load. Size 3 x 10 x 4 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Dočasně vyprodáno
zł4,25
-
Přidat k OblíbenýmCork shock absorber for step engines 3 mm
Cork shock absorber for step engines with NEMA17 flange measures 42 x 42 x 3 mm. It is used to reduce the transmission of vibration to the printer frame, reduce heat transfer from hot engines to the plastic part of the frame, reduced resonance from the engine, fewer sounds from the printer.
Dočasně vyprodáno
zł4,93
-
Přidat k OblíbenýmBelt tensioner on profile 2020
Belt tensioner in axis x 2020. It is a kit. Available in silver and black colors. (The product can be ordered after 1 piece, the photo is only illustrative.)
Dočasně vyprodáno
zł59,33
-
Přidat k OblíbenýmBelt tensioner for profile 2020
Belt tensioner in the x 2020 axis for CR-10. It is a kit. Available in black.
Dočasně vyprodáno
zł118,83
-
Přidat k OblíbenýmFirm clutch
Solid couplings are used to connect step servomotors to alternating jet to ball screws or lead screws are widely used to produce CNC routers, CNC plasma, CNC milling machines, CNC lasers and many other automation machines. Widely used in hardware, forms and on occasions of mechanical transmission. Dimensions: 5x8/5x5 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Dočasně vyprodáno
zł13,43
-
Přidat k OblíbenýmMagnetic print pad with magnetic sticker 235 x 235 mm
It is a two -part set of magnetic print pad and a magnetic sticker that is used to stick to your print mat. Suitable for a magnetic print pad or steel printing pad. The size of the magnetic sticker is 235 x 235 mm.
Dočasně vyprodáno
zł47,43
-
Přidat k OblíbenýmMagnetic heated pad 202x186x3 - Pruša mini
HeatBed heated magnetic pad with dimensions 202.5 mm x 186 mm x 3 mm, suitable for 3D printer Pruša Mini. Integrated magnets.
Dočasně vyprodáno
zł220,83
-
Přidat k OblíbenýmBuddy Board - control board for Pruša mini
32-bit control plate with integrated Drivers TMC2209 Step Motor driver. Plate for stepping 3D printer or other machines. Compatible with 3D printer MINI MINI+.
Dočasně vyprodáno
zł322,83
-
Přidat k OblíbenýmStep motor 0.42 Nm with trapezoid T8x8 and matrix
Step engine NEMA 17 with integrated trapezoidal screw T8x8 and nut. Available length of trapezoidal screw 300 mm, 400 mm, 500 mm. Matrix recommended replacing a nut with a spring to define clearance or plastic nut. Thanks to the integrated screw you do not have to use flexible clutches or joints with different hoses.
Dočasně vyprodáno
od zł93,33
-
Přidat k OblíbenýmPowder PEI print pad MK52 - double -sided steel
PEI steel pad suitable for 3D printing. It facilitates 3D printing, the printout can be easily removed from this pad. The pad is double -sided with easy maintenance. Dimensions: 241 x 253.8 mm
Dočasně vyprodáno
zł144,33
-
Přidat k OblíbenýmMagnetic print pad - black elastic plate
Steel pad suitable for 3D printing. It facilitates 3D printing, the printout can be easily removed from this pad. The pad is double -sided with easy maintenance. Suitable for magnetic pads, if you do not have a magnetic pad, you can buy magnets. Black pad for 3D printing
Dočasně vyprodáno
od zł127,33