PLALAMENT L-EGO yellow 1.75 mm aurabol 1kg

Aurabol print strings are a new discovery from Znojmo. It deserves its attention for the use of high -quality ingredients without unnecessary admixtures, which will ensure durable prints.

PLA ( Polyactid Acid ) is Virgin granulate from natural starchs. It is a compostable and environmentally friendly material. PLA is quite hard, but it is not suitable for very stressed parts. What is a big advantage is its easy printability. There is no need for a heated pad for printing, there is no undesirable odor and even deformation during the cooling of the model. It is therefore user -friendly the most commonly used filament.

Properties:

• ease of printing
• very great accuracy of detail
• without deformations
• Biodegradible material
• Made of renewable sources

Settings:

• Recommended Print Temperature: 200 - 220 ° C
• Flow Flow: 100 %
• Retraction: ± 5 mm
• Recommended printing speed: 30 - 60 mm/s
  
• Filament length on coil: approx. 340 meters
• Weight of: 1000 grams

from the so -called Virgin granulate - does not contain recycled or other undesirable admixtures.


> Dimensions of the coil >
Width: 70 mm
Weight without filament: 250 grams
80 x 230 x 200 mm

in Yrobeno in the Czech Republic.

Eng

Aurabol IS and New Czech Brand of Filaments from Znojmo. IT DESERVES ATTENTION DUE TO THE USAGE OF QUALITY RAW MATERIALS WITHOUT UNNECESSARY ADDITIES, WHICH ENSURES DUURABLE PRINTS.

The Basic Component of Pla (Pla (Polyactid Acid) from Aurabol is Virgin Granulate from Natural Starches. IT is and compostable and environmentally friendly material. PLA IS QUITE TOUGH, but it is not suitable to use it for stressed parts. However The Great Advantage is Its Easy Printability. You do not needed and Heated Be for Printing From This Material and It Does Not Release Unwanted Odors As Well As It Does Not Deforms During Cooling of the Model. IT IS THEREFORE The Most User-Friendly Filament.

Properties:

• Easy to Print
• Very High Accuracy of Details
• No deformations
• Biodegradable Material
• Made from renewable sources

Settings:

• Reommended Temperature: 200 - 220 ° C
• Heated Bed Temperature: 40 - 60 ° C
• Flow: ± 100 ° C
• Retraction: ± 5 mm
• Recommended Printing Speed:
• Lenght of the Filament on the Spool: Approximates 340 M
• Coil Weight: 1 kg
  • >

Coil Dimensions

• outer diameter: 300 mm
• Shaft Bore - Inside Diameter: 55 mm
• Width: 70 mm
• Weight Without Filament: 250 Grams
• Package Dimensions (Box): 80 x 230 x 200 mm

Made in the Czech Republic.