ABS eSUN filament 2.85 mm 0.5 kg

【ABS】 ABS filament with higher strength, toughness and better resistance to heat, wear and impact. The material is compatible with most 3D printers for 2.85mm filament.
【Stable Dimensional Tolerance】Minimum tolerance and small shrinkage - ensure consistent feeding and stable prints, no clogging, extremely high printing success, resulting in printed parts that have excellent surface finish and are very accurate. (Depending on the printer)
【No knotting and clogging】Material with excellent roundness and very small diameter tolerance, no overlapping or tangling. It melts easily, does not crack, does not contain bubbles. Print smoothly and repeatedly without clogging the nozzle or extruder.
【Recommended printing temperature】The nozzle temperature of 220-260 °C will ensure smooth prints without frequent calibration and fewer problems with the extruder.
【Vacuum-sealed packaging】 Net weight of material : 0.5 kg. eSUN's filament comes sealed in a vacuum bag with a desiccant that keeps it dry and free of dust and foreign particles, preventing clogging of nozzles and providing smooth 3D models.

• String diameter: 2.85 ± 0.03 mm
• Coil Dimension: Diameter 200mm - Width 38mm - Center Hole 57mm
• Package size: 216 x 202 x 76 mm
• Package weight: 0.9 kg
• Nozzle temperature: 220-260℃
• Pad temperature: 90-110℃
• Density: 1.04 g / cm3
• Melt Flow Index: 12 (220°C / 10kg) g / 10min
• Tensile strength: 43 Mpa
• Elongation at breaking point: 22%
• Bending strength: 66 Mpa
• Modulus of strength in bending: 2348 Mpa
• Notch toughness: 19 KJ / ㎡
• Deformation temperature: 78 (°C, 0.45Mpa)
• Manufacturer: eSUN