Vyhledávání
-
Přidat k OblíbenýmCopymaster3D Tough UV ABS Like Resin - 500 ml - Light Grey
Tough ABS Like UV Resin from Copymaster3D enables you to print high quality models that require higher part strength and resistance to deformation. This resin is compatible with all popular 3D Printer brands using a light wavelength between 395nm and 405nm.The main properties and advantages of using Copymaster3D Tough ABS Like UV resinPerfect for reproducing fine details and surface...
Na objednávku (10001 ks)
389 Kč
-
Přidat k OblíbenýmPrimaCreator Raise3D Pro2 Plated Copper Ruby Nozzle 0,6 mm - 1 pcs
A regular brass nozzle is most often recommended as they have a superior conductivity when it comes to heat. But a brass nozzle has its draw backs. If you want to print with an abrasive material like carbon or glow in the dark filament a regular brass nozzle will wear out in a very short time. This is why you can choose to use a hardened steel nozzle, it will not wear out as quick as a brass...
Na objednávku (10001 ks)
1489 Kč
-
Přidat k OblíbenýmLayFilaments GROWLAY Filament - 1.75mm - 250 grams - Brown
GROWLAY filament from Lay-Filaments is a very interesting 3D printing filament that works like a growing medium. With this revolutionary material you can print objects and grow biological cultures (grass, moss, etc.) on it. GROWLAY is a filament specially designed for use with popular desktop FDM 3D printers. Main featuresMold grows through the open-cell capillaries and forms a mycelium.Seeds...
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmPrimaCreator Raise3D Pro2 Plated Copper Ruby Nozzle 0,4 mm - 1 pcs
A regular brass nozzle is most often recommended as they have a superior conductivity when it comes to heat. But a brass nozzle has its draw backs. If you want to print with an abrasive material like carbon or glow in the dark filament a regular brass nozzle will wear out in a very short time. This is why you can choose to use a hardened steel nozzle, it will not wear out as quick as a brass...
Na objednávku (10001 ks)
1489 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Micro - 1.75mm, 12V Single Nozzle Kit
Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...
Na objednávku (10001 ks)
2809 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Micro - 1.75mm, 24V Single Nozzle Kit
Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...
Na objednávku (10001 ks)
2809 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Micro - 1.75mm, 24V Fully Loaded Kit
Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...
Na objednávku (10001 ks)
4139 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR - 1.75mm, 12V Single Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
2619 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.6mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.8mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Triple Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
1639 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm Variety Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
1989 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ HeaterCore 12V
The Revo HeaterCore is a heating and sensing architecture for E3D’s RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package.
Na objednávku (10001 ks)
979 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Fully Loaded Sock Pack
E3D colour-coded silicone socks for Revo Nozzles. Never run out of silicone socks for your Revo 3D printing setup! This colour-coded sock kit includes ten silicone socks for all your 3D printing needs.
Na objednávku (10001 ks)
239 Kč