Vyhledávání
-
Přidat k OblíbenýmE3D RapidChange Revo™ Six - 1.75mm, 12V Fully Loaded Kit
Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at...
Na objednávku (10001 ks)
4139 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR - 1.75mm, 12V Single Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
2619 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR - 1.75mm, 24V Single Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
2619 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.6mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.8mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Triple Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10000 ks)
1639 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm Variety Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
1989 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ HeaterCore 12V
The Revo HeaterCore is a heating and sensing architecture for E3D’s RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package.
Na objednávku (10000 ks)
979 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Fully Loaded Sock Pack
E3D colour-coded silicone socks for Revo Nozzles. Never run out of silicone socks for your Revo 3D printing setup! This colour-coded sock kit includes ten silicone socks for all your 3D printing needs.
Na objednávku (9999 ks)
239 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR HeaterCore 24V
This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the hassle of any firmware changes to your Creality 3D printer.
Na objednávku (10001 ks)
979 Kč
-
Přidat k OblíbenýmPrimaCreator Value UV / DLP Resin - 1000 ml - White
Buy PrimaCreator Value UV / DLP resin to create 3D prints with delicate structures, fine details and wonderful surfaces. Process this resin on your UV LED & DLP 3D printer in a wavelength range of 395 to 405 nanometres.Material properties PrimaCreator Value UV / DLP resin:Application on your UV-LED & DLP-3D printersOptimized for processing in the wavelength range of 395-405 NmFine...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmPrimaCreator Value UV / DLP Resin - 1000 ml - Light Grey
Buy PrimaCreator Value UV / DLP resin to create 3D prints with delicate structures, fine details and wonderful surfaces. Process this resin on your UV LED & DLP 3D printer in a wavelength range of 395 to 405 nanometres.Material properties PrimaCreator Value UV / DLP resin:Application on your UV-LED & DLP-3D printersOptimized for processing in the wavelength range of 395-405 NmFine...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmPrimaCreator Value UV / DLP Resin - 1000 ml - Black
Buy PrimaCreator Value UV / DLP resin to create 3D prints with delicate structures, fine details and wonderful surfaces. Process this resin on your UV LED & DLP 3D printer in a wavelength range of 395 to 405 nanometres.Material properties PrimaCreator Value UV / DLP resin:Application on your UV-LED & DLP-3D printersOptimized for processing in the wavelength range of 395-405 NmFine...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmPrimaCreator Value UV / DLP Resin - 500 ml - Clear
Buy PrimaCreator Value UV / DLP resin to create 3D prints with delicate structures, fine details and wonderful surfaces. Process this resin on your UV LED & DLP 3D printer in a wavelength range of 395 to 405 nanometres.Material properties PrimaCreator Value UV / DLP resin:Application on your UV-LED & DLP-3D printersOptimized for processing in the wavelength range of 395-405 NmFine...
Na objednávku (10001 ks)
359 Kč