Popis
PrimaSelect NylonPower Carbon Fiber belongs to the latest generation of high-performance 3D printer filament. The material is based on nylon 12 and is reinforced with 20% carbon fibres. This composition results in an optimally resistant filament.
Material properties PrimaSelect NylonPower Carbon Fiber:- High chemical and thermal resistance for extreme loads
- Excellent surface quality for noble looking 3D prints
- Easy to 3D print – Less warping than normal pure nylon material
- Produce very strong parts – Perfect for RC, drones and strong end use parts
Basic Data Printing Parameter
Filament Typ | NylonPower Carbon Fibre |
Diameter | 2,85 mm |
Tolerance | 0,05 mm |
Weight | 0,50 kg |
Lenght | 78 m |
Color | - ohne Color Code |
Recomended Printing Temp Min | 250 ºC |
Recomended Printing Temp Max | 265 ºC |
Recomended Printbed Temperature Min | 60 ºC |
Recomended Printbed Temperature Max | 70 ºC |
Recomended Printing Speed Min | 40 mm/s |
Recommended Printing Speed Max | 40 mm/s |
Recomended Fan Speed Min | 20 % |
Recomended Fan Speed Max | 60 % |
General | |
Specific gravity | 1 g/cm3 ISO 1183 |
Mold Shrinkage | ,3 ISO 294 |
Specific volume resistivity | 10^3 Ωm IEC 60243 |
Temperature | |
Heat deflection temp | 155 °C ISO 75 |
Tensile | |
Tensile strength | 100 MPa ISO 527 |
Tensile modulus | 6000 MPa ISO 527 |
Flexural | |
Flexural Strenght | 117,9 % ISO 178 |
Flexural Modulus | 3956 ISO 178 |
Other | |
Impact Strength | 60 KJ/m2 ISO 179/2-1eU |
Ball indentation hardness | 110 MPa ISO 2039-1 |
Doplňující informace
Kategorie: | PA - nylon |
Barva: | natural |
Váha materiálu: | 0,5 kg |
Průměr: | 2,85 mm - 3 mm |
PrimaSelect NylonPower uhlíkové vlákno - 2,85 mm - 500 g - natural
1479 Kč