Popis
PrimaSelect NylonPower Carbon Fiber belongs to the latest generation of high-performance 3D printer filament. The material is based on nylon 12 and is reinforced with 20% carbon fibres. This composition results in an optimally resistant filament.
Material properties PrimaSelect NylonPower Carbon Fiber:- High chemical and thermal resistance for extreme loads
- Excellent surface quality for noble looking 3D prints
- Easy to 3D print – Less warping than normal pure nylon material
- Produce very strong parts – Perfect for RC, drones and strong end use parts
Basic Data Printing Parameter
| Filament Typ | NylonPower Carbon Fibre |
| Diameter | 2,85 mm |
| Tolerance | 0,05 mm |
| Weight | 0,50 kg |
| Lenght | 78 m |
| Color | - ohne Color Code |
| Recomended Printing Temp Min | 250 ºC |
| Recomended Printing Temp Max | 265 ºC |
| Recomended Printbed Temperature Min | 60 ºC |
| Recomended Printbed Temperature Max | 70 ºC |
| Recomended Printing Speed Min | 40 mm/s |
| Recommended Printing Speed Max | 40 mm/s |
| Recomended Fan Speed Min | 20 % |
| Recomended Fan Speed Max | 60 % |
| General | |
| Specific gravity | 1 g/cm3 ISO 1183 |
| Mold Shrinkage | ,3 ISO 294 |
| Specific volume resistivity | 10^3 Ωm IEC 60243 |
| Temperature | |
| Heat deflection temp | 155 °C ISO 75 |
| Tensile | |
| Tensile strength | 100 MPa ISO 527 |
| Tensile modulus | 6000 MPa ISO 527 |
| Flexural | |
| Flexural Strenght | 117,9 % ISO 178 |
| Flexural Modulus | 3956 ISO 178 |
| Other | |
| Impact Strength | 60 KJ/m2 ISO 179/2-1eU |
| Ball indentation hardness | 110 MPa ISO 2039-1 |
Více z kategorie
Doplňující informace
| Kategorie: | PA - nylon |
| Barva: | natural |
| Váha materiálu: | 0,5 kg |
| Průměr: | 2,85 mm - 3 mm |
PrimaSelect NylonPower Uhlíkové vlákno - 2,85 mm - 500 g - Přírodní
1489 Kč
1230,58 Kč bez DPH